General
This section describes the computational methodologies employed by Culvert Studio. It is highly recommended that you review the computational methods...
Computational Methods
Describes the computational methodologies employed by Culvert Studio
-
-
Water Surface Profiles in Culverts
Describes Culvert Inlet Control and Outlet Control calculation procedures -
Roadway Overtopping
Overtopping will begin when the headwater, (Hw) rises to the elevation of the roadway. The overtopping will usually occur at... -
Supercritical Flow Profiles
Culvert Studio has the ability to compute supercritical flow profiles with hydraulic jumps automatically. During friction loss calculations, if the... -
Estimating Culvert Scour
Discusses culvert scour and riprap apron design -
The Rational Method
The Rational method was developed over 100 years ago and continues to be used for urban watershed modeling, typically on... -
Channel Sections
Culvert Studio computes various parameters for a wide variety of channel shapes. In all cases, steady flow is assumed and...