{"id":474,"date":"2017-11-03T17:25:03","date_gmt":"2017-11-03T17:25:03","guid":{"rendered":"https:\/\/learn.hydrologystudio.com\/hydrology-studio\/?post_type=ht_kb&p=474"},"modified":"2021-05-18T20:05:50","modified_gmt":"2021-05-18T20:05:50","slug":"general-2","status":"publish","type":"ht_kb","link":"https:\/\/learn.hydrologystudio.com\/hydrology-studio\/knowledge-base\/general-2\/","title":{"rendered":"General"},"content":{"rendered":"

A primary function of Hydrology Studio is detention pond design and routing. This section describes how to set up a detention pond. Once set up you can route any existing hydrograph through it.<\/p>\n

\"\"<\/p>\n

A maximum of 25 unique ponds can be set up for any given project. Each pond can contain a wide variety of outlet devices acting independently or in series with a culvert as “Multi-stage” configurations.<\/p>\n

Since a Pond is not technically a hydrograph, its icon is not displayed on the Basin Model.<\/p>\n

\"\"<\/p>\n

Creating a New Pond<\/h2>\n

To begin, click on the [Pond] button on the Ribbon Toolbar or the small pond button on the Pond Route input box.<\/p>\n

\"\"<\/p>\n

This opens the Pond Designer window. The Pond Designer is setup in a wizard-like way and will guide you from start to finish using just three steps. You can freely navigate back and forth between steps until your design is complete. The first step is optional.<\/p>\n